HP Designjet Z6100 Printer Series - User's Guide

WARNING! Make sure that the printer wheels are locked (the brake lever is pressed down) to
prevent the printer from moving.
1.
On the printer's front panel, select the
icon, and then select Replace maintenance ctg.
2.
The maintenance cartridge is located in a slot underneath the front panel, at the front of the printer.
Open the door.
3.
The maintenance cartridge has a handle on the front. To remove the cartridge, press inward and
upward as indicated by the arrow, until the cartridge is released.
4.
Lift up the maintenance cartridge to remove it from the slot, and slide it out.
See also Insert the maintenance cartridge on page 75.
74 Chapter 5 Handle the ink system
Handle the ink system