HP Designjet Z6100 Printer Series - User's Guide

6.
Wait until the paper emerges from the printer, as shown in the following graphic.
NOTE: If you have an unexpected problem at any stage of the paper loading process,
see
The paper cannot be loaded successfully on page 163.
7.
Align the edge of the paper with the blue line and the left edge of the semi-circle to the right of the
platen.
TIP: It may be helpful to also align the lead edge of the paper with the front edge of the
platen. You can use a blade or scissors to improve the lead edge of the paper if it is not
straight or is not cut well.
8.
When the paper is correctly aligned with the blue line and half-circle, lower the paper-load lever.
9.
Wait for the front-panel message that prompts you to wind excess paper onto the roll.
34 Chapter 4 Handle the paper
Handle the paper