HP Designjet Z6100 Printer Series - User's Guide
Depth < 860 mm (with take-up reel)
< 700 mm (without take-up reel)
Height ≈ 1370 mm
Memory specifications
Table 17-8 Memory specifications
Memory (DRAM) supplied 256 MB
Memory (DRAM) maximum 512 MB
Hard disk 40 GB
Power specifications
Table 17-9 Printer power specifications
Source 100 – 127 Vac / 220 – 240 Vac ±10%, autoranging
Frequency 50–60 Hz
Current < 4 A
Consumption 350W
maximum
Ecological specifications
This product complies with European Union WEEE and RoHS Directives.
ENERGY STAR and the ENERGY STAR mark are registered U.S. marks To determine the ENERGY STAR®
qualification status of these product models. See:
http://www.hp.com/go/energystar.
For up-to-date ecological specifications of your printer, please go to
http://www.hp.com/ and search for
“ecological specifications”.
Environmental specifications
Table 17-10 Printer environmental specifications
Relative humidity range for best print quality 20–80%, depending on paper type
Temperature range for best print quality 15 to 30°C (59 to 86°F), depending on paper type
Temperature range for printing 5 to 40°C (41 to 104°F)
Temperature range when not in operation -20 to +55°C (-4 to +131°F)
Maximum altitude when printing 3000 m
NOTE: If the printer or ink cartridges are moved from a cold location to a warm and humid
location, water from the atmosphere can condensate on the printer parts and cartridges and can
result in ink leaks and printer errors. In this case, HP recommends that you wait at least 3 hours
before turning on the printer or installing the ink cartridges, to allow the condensate to evaporate.
Table 17-7 Printer physical specifications (continued)
Memory specifications 191
Printer specifications