HP Designjet Z6100 Printer Series - Setup Poster (60 inch)

Page 17
11 4 115
Open the printer window.
116
Lift the paper-load lever.
11 7
11 8
Insert the lead-edge of the paper into the printer,
above the black roller.
11 9
Wait until the paper emerges from the printer as
shown.
12 0
Make sure that the paper is aligned with the blue
line and the semicircle on the platen.
121
Pull out approximately 1m (3 feet) of paper to
avoid back tension on the spindle, which can
cause difficulties when loading the paper into
the printer.
1m (3ft)
Lower the paper-load lever.
Wait until this message appears on the front
panel.