HP Designjet Z6100 Printer Series - Setup Poster (60 inch)

10'
Page 15
99
Close the carriage assembly cover.
100
Lower and lock the blue latch.
Make sure that the blue latch is correctly
engaged, and then lower the latch.
101 102
Close the printer window.
103
104
105
Place one of the two rolls of paper that came
with your printer in the middle of the take-up reel
deflector.
Wait until the Ready for paper message
appears on the front panel.
Load the paper
Box required
x1
Steps 104 to 128
If a "Reseat" message appears on the front
panel, check that all of the protective tape has
been removed, and then firmly reseat the
printheads. If the problem persists, refer to the
HP Start-Up Kit CD/DVD.
Remove the spindle from the printer.
This task requires 1 person.
Time required is 25 minutes.
25'