HP Designjet Z6100 Printer Series - Setup Poster (60 inch)

Page 11
Install the ink supplies
Boxes required
x1
Steps 75 to 103.
1
2
3
4
5
70
Open the printer window, and then remove the
packing items 1 to 5 from the interior of the
printer.
71
Remove the protective covering from the printer
window and the front panel screen.
1
2
72
Remove the Quick Reference Guide holder from
the supplies box.
Attach the Quick Reference Guide holder by
angling the holder forward at the top (1),
positioning the two hooks, and then
''clicking'' the lower part (2) to the rear
of the printer.
73
Plug the Gigabit Ethernet cable into the Gigabit
Ethernet connection.
74
Pass the Gigabit Ethernet cable through the hook
at the rear of the printer.
1
4
7
6
5
3
2
69
Remove the packing tapes marked 1 to 7 from
the exterior of the printer, and then lower the
take-up reel deflector.
Unpack more components
Box required
x1
Steps 69 to 74.
This task requires 1 person.
Time required is 5 minutes.
5'
This task requires 1 person.
Time required is 40 minutes.
40'