HP Designjet Z6100 Printer Series - Setup Poster (60 inch)
61
Tighten the plastic nut on the black hub.
62
Loosen the plastic nut on the blue hub.
63
Slide the blue hub onto the spindle.
Tighten the plastic nut on the blue hub.
64
Raise the take-up reel deflector to its upright
position.
65
Unlock the take-up reel by pushing the spindle
lever to its upper most position.
66
Load the take-up reel spindle into the printer
by pushing firmly on each end of the spindle.
67
See the HP Start-Up Kit CD/DVD for information
about how to use the take-up reel.
68
Page 10
Slide the black hub onto the spindle so that the
screw on the spindle fits into the slot on the
spindle hub.