HP Designjet Z6100 Printer Series - Setup Poster (42 inch)
Page 8
1
1
2
2
3
4
5
2
1
3
4
5
6
7
Unpack more components
This task requires 1 person.
Time required is 5 minutes.
Box required
x1
Steps 47 to 52.
47
Remove the packing tapes marked 1 to 7 from
the exterior of the printer.
46
Use the blue handle to open the bin.
HP recommends that you leave the bin in the
closed position while completing the printer
assembly procedures.
45
Click the ends of both bin arms into the metal
brackets.
51
Plug the Gigabit Ethernet cable into the Gigabit
Ethernet connection.
50
Remove the Quick Reference Guide holder from
the supplies box.
Attach the Quick Reference Guide holder by
angling the holder forward at the top (1),
positioning the two hooks, and then
'clicking' the lower part (2) to the rear
of the printer.
49
Remove the protective covering from the printer
window and the front panel screen.
48
Open the printer window, and then remove the
packing items 1 to 5 from the interior of the
printer.
5'
HP DesignJet Information Engineering