HP Designjet Z6100 Printer Series - Setup Poster (42 inch)

Page 2
Remove the packaging
This task requires 2 people.
Time required is 5 minutes.
Steps 1 to 4.
x2
Boxes required
Assemble the stand
This task requires 2 people.
Time required is 20 minutes.
Box required
x2
x2
x4
x2
Steps 5 to 25.
5
Remove the first tray from the box shown.
4
Remove the box shown.
2
Carefully cut the straps around the boxes. Make
sure that the boxes don't fall when the straps
are cut.
3
Remove the boxes shown.
1
Remove the 4 upper plastic handles from the
sides of the box (two each side), and then
carefully remove the two side lids vertically.
6
Remove the two boxes marked L and R from the
first tray.
5'
20'
HP DesignJet Information Engineering