HP Designjet Z6100 Printer Series - Setup Poster (42 inch)

Mac OS
Set up and connect your printer
Box required
1. Set up and connect your printer
(Mac OS X)
Network connection (Bonjour/Rendezvous).
1. Make sure that the printer is turned on and
connected to a functioning Ethernet network, and
that all of the computers in the network are turned
on and connected (including hubs and routers).
2. On the printer's front panel, select the
icon, select Connectivity, Gigabit Ethernet,
and then select View configuration. Note the
mDNS service name that appears on the front
panel.
3. Insert the HP Start-Up Kit CD/DVD into your
CD/DVD rive, double-click the CD/DVD icon on
your screen, and then look for the ‘Mac OS X HP
Designjet Installer’ icon.
4. Double-click the appropriate icon to launch the
installer, and then follow the onscreen instructions.
Note: HP recommends that you use the
Easy Install option.
5. When the software has been installed, the
HP Printer Setup Assistant starts automatically to
help you set up a connection to your printer. Follow
the onscreen instructions.
6. In the HP Printer Setup Assistant, click the
Continue button.
7. In the list of printers that appears, select
a line that contains the mDNS service name of
your printer in the Printer Name column, and
‘Bonjour/Rendezvous’ in the Connection Type
column. Scroll sideways if necessary to see the
Connection Type column.
• If your printer appears in the list, click the
Continue button and proceed to step 8.
• If your printer does not appear in the list,
proceed to step 10.
8. The following screen displays information about
the installation of your printer. If necessary, rename
your printer and then click the Continue button.
9. Continue following the onscreen instructions.
When you reach the Printer Queue Created screen,
click the Quit to exit, or click the Create New
Queue if you want to connect another printer to
the network.
10. Select My printer is not on the list and
click the Continue button.
11. Select the connection type.
12 . Follow the onscreen instructions that guide you
through the process of connecting your printer to
the network, and then click the Quit button to close
the assistant window.
Page 17
HP DesignJet Information Engineering