HP Designjet Z6100 Printer Series - Quick Reference Guide

Insert an ink cartridge
1.
Pick up the new ink cartridge and find the label that identifies the ink color. Hold
the ink cartridge so that you can see the label at the top of the side that is facing
you.
2.
Check that the colored label above the empty slot in the printer matches the
color of the label on the cartridge.
3.
Shake the cartridge vigorously for about 15 seconds.
4.
Insert the ink cartridge into the cartridge drawer.
Slide the drawer and cartridge into the slot until they lock into position. If you
have difficulty, see Cannot insert an ink cartridge in Using your printer.
5.
The front-panel display confirms that all cartridges have been correctly inserted.
Remove a printhead
WARNING! Make sure that the printer wheels are locked (the brake lever
is pressed down) to prevent the printer from moving.
Insert an ink cartridge
29
Handle the ink