HP Designjet Z6100 Printer Series - Quick Reference Guide

NOTE: The automatic paper-cutter feature is disabled for some of the
heaviest media types, because they can damage the cutter.
Use the winding button on the take-up reel motor to wind the remainder of the
paper around the take-up reel spindle.
6.
Press the OK button on the front panel.
The amount of printed paper that is on the take-up reel spindle appears on the
front panel.
7.
Unlock the take-up reel spindle by pushing the spindle lever to its uppermost
position.
Remove the roll from the printer, pulling out the end on the right side of the
printer first. Do not insert your fingers into the spindle supports during the
removal process.
8.
To remove the roll from the printer after you have unloaded the take-up reel,
see
Unload a roll from the printer on page 15.
View information about the paper
On the printer's front panel, select the icon, and then select View loaded
paper > View paper details.
View information about the paper
23
Handle the paper