HP Designjet Z6100 Printer Series - Quick Reference Guide

Press the OK button on the front panel. The printer advances the paper.

NOTE: Make sure that you insert the loop-shaping core. The take-up

reel will not function correctly without it. The loop-shaping core must

have end caps. Make sure that the end caps extend over the edges of

the paper.

10.

Carefully insert the loop-shaping core, and the press the OK button on the front

panel. The Ready message appears.

NOTE: You are not required to press the OK button if you are loading

the take-up reel during printing.

NOTE: Make sure the loop-shaping is inserted. The take-up reel will

not function correctly without it. The loop-shaping core must have end

caps. Make sure that the end caps extend over the edges of the paper.

When the printer is printing and the take-up reel is operating, the paper is fed

from the printer, drops down in a loop, and then up into the take-up reel spindle.

NOTE: While the take-up reel is operating, make sure that the take-

up reel sensors are not blocked.

Use the take-up reel

Handle the paper