HP Designjet Z6100 Printer Series - Quick Reference Guide

Use the wind-direction switch on the take-up reel motor to select the winding

direction. Setting 1 winds the paper so that the printed image faces in.

Setting 2 winds the paper so that the printed image faces out.

The front panel shows you to the correct setting based on the winding-direction

decision you made in step 5.

Gently lower the take-up reel deflector, and then press the OK button on the

front panel. The printer advances the paper.

Assemble a loop-shaping core by matching the shape-coded and color-coded

lengths of plastic tubing. The loop-shaping core must be the same width as the

paper that you are using. Make sure that both end caps are firmly fitted on the

ends of the loop-shaping core.

NOTE: The front-panel display shows the required length of the loop-

shaping core based on the width of the roll that you have loaded into

the printer.

20 Chapter 2 Handle the paper

Handle the paper