HP Designjet Z6100 Printer Series - Quick Reference Guide

Pull the paper taut to the take-up reel spindle core. Do not attempt to pull more

paper out of the printer. Use tape to secure the paper to the spindle core. You

might need to use more tape than is shown in the following image. The paper

should be secure enough to support the weight of the loop-shaping core, which

you insert in step 10.

NOTE: If you are loading the take-up reel during printing you do not

need to pull the paper taut. Tape the paper to the spindle core when an

adequate length of paper has fed from the printer after printing begins.

NOTE: To avoid having the paper skew as it winds onto the spindle

core, make sure the paper is straight when you attach it. It is sometimes

useful to use the core grooves to align the paper.

Use the take-up reel

Handle the paper