HP Designjet Z6100 Printer Series - Quick Reference Guide

●

Check that neither side of the spindle core has end caps, and make sure the

spindle core is pushed firmly into both spindle guides.

●

If you are using a HP Designjet Z6100 42–in Printer, make sure that the bin

loop is placed behind the foot brace so that it does not block the take-up reel

sensors.

NOTE: If you want to load the take-up reel during printing, familiarize

yourself with the procedural steps. Loading the take-up reel during printing

requires you to complete the procedure while the printer is feeding and

printing paper. Loading the take-up reel during printing saves approximately

1 m (3 feet) of paper.

Attach a roll to the take-up reel

On the printer's front panel, select the

icon, and then select Take-up

reel > Load take-up reel.

2. If you want to load the take-up reel now, select Load take-up reel now on

the front panel. If you want to load the take-up reel during printing, select Load

it during printing on the front panel.

Make sure that the take-up reel deflector is in its upright position.

Unlock the take-up reel spindle by pushing the spindle lever to its uppermost

position.

Use the take-up reel

Handle the paper