HP Designjet Z6100 Printer Series - Quick Reference Guide

7.
Lower the printer window.
8.
Wait for the front panel to again prompt you to wind excess paper onto the roll.
9.
The printer will perform a color calibration if it has not already calibrated the
paper type you are using, and if color calibration is turned on. See
Color
calibration on page 49.
10.
Select the paper category and paper type of the roll you are loading. Then select
the length of the roll you are loading.
NOTE: If it is not clear which paper category or paper type to select,
see the Supported paper types section in the HP Start-up Kit CD/DVD.
Load a roll into the printer
13
Handle the paper