HP Designjet Z6100 Printer Series - Quick Reference Guide

WARNING! Take care not to touch the rubber wheels on the platen
while loading paper. These wheels can rotate and trap skin, hair, or
clothing. Take care not to push your fingers inside the printer's paper
path.
NOTE: If you have an unexpected problem at any stage of the paper
loading process, see
The paper cannot be loaded successfully
on page 69.
5.
Align the edge of the paper with the blue line and the left edge of the semi-circle
to the right of the platen.
TIP: It may be helpful to also align the lead edge of the paper with
the front edge of the platen. You can use a blade or scissors to improve
the lead edge of the paper if it is not straight or is not cut well.
When the paper is correctly aligned with the blue line and half-circle, lower the
paper-load lever.
6.
Wait for the front-panel message that prompts you to wind excess paper onto
the roll.
Wind the excess paper onto the roll. Use the hub to turn the roll in the direction
shown.
12 Chapter 2 Handle the paper
Handle the paper