HP DesignJet and HP PageWide XL Printers - Security Features

HP DesignJet Printer Series Security Settings
72
Change the Port Number field to “8081”. Then, the address to access to Netgard MFD Configuration will be
“https://192.168.20.1:8081”.
Additional information
• When the Netgard feature is configured in a specific printer, in the case of changing the printer by a different
one, it will be necessary to disconnect the appliance (unplug the power supply cable from the appliance)
before connecting the Netgard HW to the new printer; otherwise, it will not be possible to configure the
Netgard feature.
• Netgard is not compatible with other features such as “Abacus”, “Planwell”, etc. Therefore, it’s necessary to
make sure that all those features are disabled in Front Panel.
• For further information, please, refer to the documents below:
o CAC readers.pptx
o APINETGARD with DHCP (Faltan logos y ultima revision).docx
DesignJet Printers supported:
• HP DesignJet T2500 and T3500 MFP
• HP DesignJet T795, T920, T930, T1530, T2530 and T1500 printer series
PageWide Printers supported:
• HP PageWide XL 8000 Printer series
• HP PageWide XL 5000 Printer series
• HP PageWide XL 4000/4500 Printer series