HP DesignJet and HP PageWide XL Printers - Security Features

HP DesignJet Printers Security Settings
41
PJL Name
Description
Accepted values
Example
STRINGCODESET
Indicates the string's
codification type used for
the "@PJL JOB NAME, @PJL
SET JOBNAME and @PJL
SET USERNAME" commands
(therefore, it comes before
them).
UTF8
UTF8URL
ROMAN8
KAN8
@PJL SET
STRINGCODESET=UTF8
JOBNAME
(also set via @PJL JOB
NAME)
Sets the localized version of
the job name. It requires
specification of the string's
codification type. This value
has precedence over the
"@PJL JOB NAME=jobname".
Maximum length is 128
bytes.
<String>
@PJL SET JOBNAME="My Job"
@PJL JOB NAME="My Job"
USERNAME
Sets the localized version of
the user name. It requires
specification of the string's
codification type.
<String>
@PJL SET
USERNAME="wintest"
MARGINLAYOUT
Selects how the margins will
be applied.
STANDARD
OVERSIZE
CLIPINSIDE
@PJL SET
MARGINLAYOUT=CLIPINSIDE
PRINTQUALITY
Specifies the desired print
quality for a page. This
command affects the entire
page. Once data has been
sent to the printer, any
subsequent print quality
change will not take effect
until the following page.
Note: HP PageWide XL Print
Quality mapping:
* Lines/Fast = DRAFT
* Uniform areas = NORMAL
* High Detail = HIGH
DRAFT
NORMAL
HIGH
@PJL SET
PRINTQUALITY=DRAFT
RENDERINTENT
Indicates which color
properties must be kept and
which can be modified.
PERCEPTUAL
COLORIMETRIC
SATURATION
@PJL SET
RENDERINTENT=PERCEPTUAL
RENDERMODE
Sets the printing mode for
your plot to color or
grayscale.
COLOR
GRAYSCALE
@PJL SET
RENDERMODE=COLOR
RESOLUTION
The value depends on the
data format and print
quality.
<Integer 75 ... 2400>
@PJL SET RESOLUTION=300
MEDIASOURCE
Selects the input media
source.
ROLL1
ROLL2
…
ROLL6
AUTO
@PJL SET
MEDIASOURCE=ROLL4