HP DesignJet and HP PageWide XL Printers - Security Features

HP DesignJet Printers Security Settings
38
This functionality is disabled by default.
In PageWide XL, the route to enable it is Settings > Connectivity > HP Connected > HP ePrint connectivity. In the same
window, you can set the behavior of the printer for this kind of job.
If you want to control the job sent with this path, you can use Hold the job and block the control panel with a
password.
You can also configure who can use this path (which e-mail addresses are allowed or forbidden). This is configured
in https://www.hpconnected.com/, an account is needed to do it.
3. Advanced workflows
This section describes some advanced printing workflows that can be used to interact with the HP PageWide XL,
DesignJet T1700, DesignJet Z6, and DesignJet Z9+ printers.
3.1 Printing using LPR protocol.
This feature allows you to print any supported file without drivers or other programs.
It can be useful to develop internal programs to manage production or to develop programs for operating systems
without a driver.
The job sent using this method will be printed with the default settings, some options can be managed using PJLs.
(See section 3.3, Print with PJLs)
This protocol must be enabled in the EWS or Web Jetadmin. If you do not use it, keep it disabled for security.