HP DesignJet and HP PageWide XL Printers - Security Features

HP DesignJet Printers Security Settings

• Go to the printer’s front panel,

• Select the Setup menu.

• Select Job management setup.

For further information, refer to the printer’s user manual, as the actual menu options may differ for a specific printer.

The following is an example of how to change the Secure File Erase setting for the HP DesignJet T1100 printer.

Secure Disk Erase (SDE)

In either of the two secure methods described above (Secure Fast Erase and Secure Sanitizing Erase), there is also

the

option to sanitize the whole disk. The sanitizing method removes any user data in a secure manner, so that the

device

can safely be moved from a secure location to an unsecure location. All disk erasing will be carried out via the

same

level of security erase.

This setting can be used via Web Jetadmin, EWS or the Control Panel’s Service menu, which is only accessible with

the

help of an HP Support representative.

• HP Web Jetadmin access: The user interface that manages the Secure File Erase and Secure Disk Erase

functionality is the HP Web Jetadmin. This is the same functionality that is used in the Web Jetadmin

device

plug-ins for LaserJet printers, which enables you to set the same global options across your fleet

of HP

LaserJets and HP DesignJets. The following example shows how to configure the HP

DesignJet T2300

using the Web Jetadmin. Note that in the Web Jetadmin this option is called Secure Storage

Erase.