Datasheet

Security
Hardware and Software Guide 7–19
Setting System Information Options
1. Open Computer Setup by turning on or restarting the
computer, and then pressing
f10 while the “F10 = ROM
Based Setup” message is displayed in the lower-left corner of
the screen.
❏ To change the language, press f2.
❏ For navigation instructions, press f1.
2. Access or set your preferences by following these directions:
❏ To view general system information, select File > System
Information.
❏ To view or enter identification values for system
components, select Security > System IDs.
3. To confirm the information or your preferences, press f10.
4. To save your information or preferences, use the arrow keys
to select File
> Save Changes and Exit, and then follow the
instructions on the screen.
Your preferences are in effect when the notebook restarts.