Datasheet

Security
Hardware and Software Guide 7–11
Requiring a Power-On Password at Restart
You can require that a power-on password be entered each time
the notebook is restarted. Enable and disable this feature in
Computer Setup:
1. Open Computer Setup by turning on or restarting the
computer, and then pressing
f10 while the “F10 = ROM
Based Setup” message is displayed in the lower-left corner of
the screen.
❏ To change the language, press f2.
❏ For navigation instructions, press f1.
2. Use the arrow keys to select Security > Password options >
Require password on restart.
3. Toggle the field to enable or disable, and then press enter.
4. Save your preferences by using the arrow keys to select File >
Save Changes and Exit. Then follow the instructions on the
screen.
Your preferences are in effect when the notebook restarts.