Datasheet

Security
Hardware and Software Guide 7–9
Power-On Passwords
A power-on password prevents unauthorized use of the notebook.
After this password is set, it must be entered each time the
notebook is turned on or restarted. A power-on password
■ Does not display as it is set, entered, changed, or deleted.
■ Must be set and entered with the same type of keys. For
example, a power-on password set with keyboard number
keys will not be recognized if you enter it with embedded
numeric keypad number keys.
■ Can include any combination of up to 32 letters and numbers
and is not case sensitive.
Setting Power-On Passwords
A power-on password is set, changed, or deleted in Computer
Setup.
To manage the password:
1. Open Computer Setup by turning on or restarting the
computer, and then pressing
f10 while the “F10 = ROM
Based Setup” message is displayed in the lower-left corner of
the screen.
❏ To change the language, press f2.
❏ For navigation instructions, press f1.
2. Use the arrow keys to select Security > Power-On
password, and then press
enter.
❏ To set a power-on password, type the password in the
New
password and Verify new password fields, and then
press
f10.