Setup Poster

hp psc 2500
photosmart series
all-in-one
reference guid e
hp psc 2500
photosmart series
all-in-one
reference guid e
Remove the yellow
plug from the
ETHERNET jack.
Connect the
ETHERNET cable to
the back of the
HP PSC.
Connect the
ETHERNET
cable to the
hub/router/
switch.
STOP! Make sure
the blue network
light on the HP PSC
is lit. This might take
60 seconds.
Connect the
ETHERNET
cable to the
access point.
(You will remove
this later.)
SSID
/Network Name:
WEP Key/Password
(if applicable):
For Macintosh, this is
called Network Name
and Password.
Remove the yellow
plug from the
ETHERNET jack.
Connect the
ETHERNET cable to
the back of the
HP PSC.
NOTE: You can use the
cable from the box or
purchase a longer cable.
Wired setup allows your
HP PSC to communicate to
your computers through a
router/hub/switch.
Wireless setup allows your
HP PSC to communicate to your
computers through a wireless
access point or base station.
Network Setup Poster - Side 2
10b
10a
Insert the HP PSC
Macintosh CD.
Double-click the HP
All-In-One Installer
icon on your folder.
Turn on your
computer and wait
for the desktop to
appear.
Make sure you are
logged onto the
network.
Disable any firewall
software.
If you have any questions,
see the Wired Network
Setup chapter in the
Reference Guide.
Follow these boxed steps for each computer that is part of the wired network.
Turn on your
computer and wait
for the desktop to
appear.
Make sure you are
logged onto the
network.
Disable any
firewall software.
If you have any questions,
see the Wireless
Network Setup chapter
in the Reference Guide.
Follow these boxed steps for each computer that is part of the wireless network.
Insert the HP PSC
Windows CD and
then, follow the
onscreen
instructions.
1
2 3
5
Choose wired
network as your
connection type.
Complete all onscreen
instructions including
the Setup Assistant.
In the Select Device
dialog box, make
sure TCP/IP
(network
) is
selected.
Insert the HP PSC
Macintosh CD.
Double-click the
HP All-In-One
Installer
icon on
your desktop.
Turn on your
computer and wait
for the desktop to
appear.
Make sure you are
logged onto the
network.
Disable any
firewall software.
Choose
wireless
network
as your
connection type.
Enter the
information that
you wrote down
earlier.
5
4
For the most up-to-date information on network setup, see www. hp.com/support
In the first dialog
box, you must select
Network as the
device connection
type.
Side 2 - Start on other side.
Wired network setup
Wireless network setup (infrastructure)
WINDOWS
USERS:
Insert the HP PSC
Windows CD and
then, follow the
onscreen
instructions.
Choose
Through the
network as your
connection type.
Choose the second
option,
connect
using a network
cable as your
connection type.
Complete the rest of
the onscreen
instructions.
After your computer
restarts, follow all
onscreen instructions
including the Fax
Setup Wizard.
7
8 9
6
10
11
Congratulations!
You are ready
to use the HP PSC.
MACINTOSH
USERS:
Congratulations!
You are ready
to use the
HP PSC.
ETHERNET
STOP! Make sure
the blue network
light on the
HP PSC is lit. This
might take 60
seconds.
Choose
Through
the network
as
your connection
type.
Choose
connect
using wireless
communication
as your connection
type.
After your
computer restarts,
complete all
onscreen
instructions
including the Fax
Setup Wizard.
Complete the rest of
the onscreen
instructions. Enter the
information your
wrote down earlier.
Make sure the blue
network light is
steady. Refer to the
Reference Guide for
help.
When you see the
Unplug Cable
dialog box,
disconnect the
cable from your
HP PSC and
access point.
For the most up-to-date information on network setup, see www. hp.com/support
1
2
3
4
Choose
Windows or
Macintosh,
and then follow
the steps carefully.
Choose
Windows or
Macintosh,
and then follow
the steps carefully.
In the box below,
write down the
information listed.
Use during step
10. If you are
unsure, see the
documentation or
web page for the
access point/base
station.
Congratulations!
You are ready
to use the HP PSC.
Congratulations!
You are ready
to use the HP PSC.
WINDOWS
USERS:
MACINTOSH
USERS:
Make sure the
blue network light
is steady. Refer to
the
Reference
Guide
for help.
ETHERNET
5 7
8 9
66
10
11
10
11
7
8 9
6
10
11
7
8
9
66
10
11
10
11
12
12
12
Complete all
onscreen
instructions
including the
Setup Assistant. In
the Select Device
dialog box, make
sure
TCP/IP
(network
) is
selected.
In the first dialog
box, you must select
Network as the
device connection
type.
Turn on your
computer and wait
for the desktop to
appear.
Make sure you are
logged onto the
network.
Disable any
firewall software.