Reference Guide

reference guide
wireless network setup
149
wireless network setup
Note: Installation time can range from 20 minutes to 1 hour depending on
your OS, the amount of available space, and the processor speed.
to install your hp psc software
1 Quit all applications.
2 Insert the HP PSC software installation CD into your computer's CD-ROM
drive.
The Welcome screen appears.
3 Click Next and follow the instructions provided by the Installer to check and
prepare the system, and install drivers, plug-ins, and software.
This will take several minutes.
connection type screen
4 At the Connection Type screen, select Through the network and then click
Next.
The Searching screen appears as the Setup program searches for your
HP PSC on the network.
printer found screen
After the HP PSC is found, the Printer Found screen appears.
5 Verify that the printer description is correct. (Use the network configuration
page to verify the printer name and Media Access Control (MAC)
address.)
Choose how you will connect your device to this computer.
Directly to this computer (for example, using a USB cable).
Through the network.
Click Next to continue.
Connection Type
Setup found the following printer.
Printer Found
Setup found the following printer:
Hp psc 2500 (IP address, MAC address)
Configure and install this printer?
Yes, install this printer.
No, install a different printer.