Reference Guide

hp psc 2500 series
chapter 7
86
network config tools
6 Click the Wireless tab.
7 Scroll down to the Encryption section where you can add Static (WEP)
encryption parameters.
8 If your network is using an authentication type other than Open System,
click Advanced Configuration within the Authentication section.
9 Configure your device for advanced authentication and security schemes.
For more information on adding wireless security to the EWS, see the
wireless network setup chapter in the Reference Guide for your HP PSC.
Note: You will lose connection to the HP PSC until the encryption/
authentication settings are applied to the rest of the nodes on the network.