Reference Guide

hp psc 2400 series
chapter 9
84
maintain your hp psc
3 Push down on the print cartridge to release it, and then pull it toward you
out of its slot.
4 If you are removing the black print cartridge in order to install the photo
print cartridge, store it in the print cartridge protector. For more
information on the print cartridge protector, see use the print cartridge
protector on page 85.
5 Remove the new print cartridge from its packaging and, being careful to
touch only the black plastic, gently remove the plastic tape by using the
pink pull tab.
Caution! Do not touch the copper contacts or ink nozzles.
6 Push the new print cartridge below the metal bar at a slight angle, into the
appropriate slot, until it clicks into place.
The tri-color print cartridge goes on the left and the black or photo print
cartridge goes on the right.