Reference Guide

reference guide
maintain your hp psc
71
maintain your hp psc
restore factory defaults
You can restore the original factory settings to what they were when you
purchased your HP PSC.
You can perform this process from the front panel only.
1 Press Setup.
2 Press 2, then press 3.
This selects Maintenance and then selects Restore Factory Defaults.
The factory default settings are restored.
set the power save time
The bulb in your HP PSC remains on for a specified period so that the device is
immediately ready to respond to your request. When the HP PSC has not been
used within that specified period, it turns the bulb off to preserve power. You
can exit this mode by pressing any button on the front panel.
Your HP PSC is automatically set to enter power-save mode after 12 hours. You
can choose 1, 4, 8, or 12 hours for the power save time.
1 Press Setup.
2 Press 2, then press 5.
This selects Maintenance and then selects Set Power Save Mode Time.
3 Press until the appropriate time appears, then press OK.
Maintenance
1: Clean Print Cartridges
2: Align Print Cartridges
3: Restore Factory Defaults
4: Set Language & Country/Region
5: Set Power Save Mode Time
6: Set Scroll Speed
7: Set Prompt Delay Time
Maintenance
1: Clean Print Cartridges
2: Align Print Cartridges
3: Restore Factory Defaults
4: Set Language & Country/Region
5: Set Power Save Mode Time
6: Set Scroll Speed
7: Set Prompt Delay Time