Reference Guide

hp psc 2300 series
chapter 4
40
copy
11 Press until Photo appears.
12 Press Start Color.
The HP PSC makes a 4 by 6 inch (10 by 15 cm) borderless copy of your
original photo, as shown below.
make multiple copies of the same original
1 Load your original face down on the right front corner of the glass.
2 Press Copy, if it is not already lit.
3 Press Options until Number of Copies appears in the top line of the
display.
4 Press or use the keypad to enter the number of copies, up to the
maximum.
(The maximum number of copies varies by model.)
Tip: If you hold down either of the arrow buttons, the number of
copies changes by increments of 5 to make it easier to set a large
number of copies.
5 Press Start Black or Start Color.
You might find it easier to copy a photo by using the HP Director software that
you installed with your HP PSC. Using the HP Director, you can easily make
letter or 4 by 6 inch (10 by 15 cm) borderless copies of your photo, enlarge
or shrink the photo to fill the size of the paper you have loaded, and turn on
Photo enhancements to ensure you get the highest quality photos. For
information on using these features in the HP Director, see the onscreen hp
photo & imaging help.
Copy Menu
Number of Copies
Borderless
Copy Quality
Paper Type
Lighter/Darker
Enhancements
Paper Size
Color Intensity
Set New Defaults
Enhancements
Text
Photo
Mixed
None