Reference Guide

reference guide

load originals and load paper

load originals & paper

load other types of paper in the input tray

The following table provides guidelines for loading certain types of paper and

transparency film. For best results, adjust the paper settings each time you

change paper types and paper sizes. For more information, see set the paper

type on page 18.

paper tips

HP Papers

• HP Premium Paper: Locate the gray arrow on the nonprinting side

of the paper, and then insert paper with the arrow side facing up.

• HP Premium Inkjet Transparency Film: Insert the film so that the

white transparency strip (with arrows and the HP logo) is on top

and is going into the input tray first.

• HP Iron-On Transfer: Flatten the transfer sheet completely before

using it; do not load curled sheets. (To prevent curling, keep

transfer sheets sealed in the original package until you are ready

to use them.) Manually feed one sheet at a time, with the

unprinted side facing down (the blue stripe faces up).

• HP Matte Greeting Cards, HP Glossy Greeting Cards, or

HP Textured Greeting Cards: Insert a small stack of HP greeting-

card paper, with the print side down, into the input tray until it

stops.

Labels

(works only with

printing)

• Always use letter-size or A4-size label sheets designed for use

with HP Inkjet products (like Avery Inkjet Labels), and make sure

that the labels are not over two years old.

• Fan the stack of labels to make sure none of the pages are

sticking together.

• Place a stack of label sheets on top of the standard paper in the

input tray, print side down. Do not insert labels one sheet at a

time.