User's Manual

it will not completely fit in the control panel display and will need to scroll. This is so
that you can read the entire message. You can choose the rate at which it will scroll:
Normal, Fast, or Slow. The default is Normal.
1. Press Setup until Preferences appears, and then press OK.
2.
Press
until Set Scroll Speed appears, and then press OK.
3.
Press
to select a scroll speed, then press OK.
Set the prompt delay time
The Prompt Delay Time option allows you to control the amount of time that passes
before a message prompts you to take further action. For example, if you press Copy
Menu and the prompt delay time passes without you pressing another button, the
message "Press Copy Menu for more options." appears in the control panel
display. You can choose Fast, Normal, Slow, or Off. If you select Off, hints will not
appear on the control panel display but other messages, such as low ink warnings
and error messages, will still appear.
1. Press Setup until Preferences appears, and then press OK.
2.
Press
until Set Prompt Delay Time appears, and then press OK.
3.
Press
to select a delay time, then press OK.
Restore the factory defaults
You can restore the current settings to what they were when you purchased your
HP All-in-One.
Note Restoring the factory defaults will not affect any changes you made to
scan settings and the language and country/region settings.
You can perform this process from the control panel only.
1. Press Setup until Tools appears, and then press OK.
2.
Press
until Restore Factory Defaults appears, and then press OK.
The factory default settings are restored.
Chapter 12
88 HP PSC 1600 All-in-One series
Maintain your HP All-in-One