User's Manual

3. Press Copy Menu until Enhancements appears.
4.
Press
until Photo appears, and then press OK.
5. Press Start Copy Color.
It is easy to set Enhancement settings for photos and other documents you copy by
using the HP Image Zone software that came with your HP All-in-One. With one click
of your mouse button, you can set a photo to copy with Photo enhancements, a text
document to copy with Text enhancements, or a document that contains both images
and text to copy with both Photo and Text enhancements turned on. For more
information, see the onscreen HP Image Zone Help.
Make a poster
You can use the Poster feature to create an enlarged copy of your original in sections
and assemble them into a poster.
1. Make sure you have paper loaded in the paper tray.
Tip If you are copying a photo into a poster, use full-size photo paper to
achieve the highest quality copy.
2. Load your original face down on the right front corner of the glass.
If you are copying a photo, position the photo on the glass so the long edge of the
photo is along the front edge of the glass.
3. Press Reduce/Enlarge.
4.
Press
until Poster appears, and then press OK.
The default poster size is two pages wide.
5.
Press
to change the poster width.
6. Press Start Copy Black or Start Copy Color.
After you select the poster width, the HP All-in-One adjusts the length
automatically to maintain the proportions of the original.
Tip If the original cannot be enlarged to the selected poster size because
it exceeds the maximum zoom percentage, an error message appears
that tells you to try a smaller width. Select a smaller poster size and make
the copy again.
7. After the poster has printed, trim the edges of the sheets and tape the sheets
together.
Chapter 7
56 HP PSC 1600 All-in-One series
Use the copy features