User's Manual

Paper type Suggested paper size settings
Copier, multi-purpose, or plain papers Letter or A4
Inkjet papers Letter or A4
Iron-on transfers Letter or A4
Letterhead Letter or A4
Photo papers 10 x 15 cm or 10 x 15 cm Borderless
13 x 18 cm or 13 x 18 cm Borderless
4 x 6 inches or 4 x 6 Borderless
5 x 7 inches or 5 x 7 Borderless
Letter or Letter Borderless
A4 or A4 Borderless
L-size or L-size Borderless (Japan only)
Hagaki cards Hagaki or Hagaki Borderless (Japan
only)
Transparency films Letter or A4
Set the copy paper type
You can set the paper type on your HP All-in-One. The default paper type setting for
copying is Automatic, which causes the HP All-in-One to detect the type of paper in
the paper tray.
If you copy onto special papers, or if you experience poor print quality by using the
Automatic setting, you can set the paper type manually from the Copy Menu.
Note The HP All-in-One cannot automatically detect transparency film. For
best results, set the paper type to Transparency before copying onto
transparency film.
1. Make sure you have paper loaded in the paper tray.
2. Load your original face down on the right front corner of the glass.
3. Press Copy Menu until Copy Paper Type appears.
4.
Press until the appropriate paper type appears, and then press OK.
5. Press Start Copy Black or Start Copy Color.
Refer to the following table to determine which paper type setting to choose based on
the paper loaded in the paper tray.
Paper type
Control panel setting
Copier paper or letterhead Plain Paper
HP Bright White Paper Plain Paper
HP Premium Plus Photo Paper, Glossy Premium Photo
Chapter 7
48 HP PSC 1600 All-in-One series
Use the copy features