Setup Poster

3 • HP All-in-One
8
9
10
7
Important: Do not connect the USB
cable until this guide instructs you
to or the software may not install
properly.
Press the On button and confi gure
Open access door
Remove tape from both cartridges
a After you press the On button, the green light fl ashes, and then
becomes solid. This may take up to a minute.
b Wait for the language prompt before continuing.To set your language
and country/region, follow the instructions on the display. Use the
arrow keys to navigate the menu. Press OK to confi rm selections.
Lift the access door until it stops.
Pull the pink tab to remove the tape from both print
cartridges.
Connect the power cord and adapter
On
Do not touch the copper-colored
contacts or retape the cartridges.