Start here Important: Do not connect the USB cable until software installation in Step 15. 1 2 Remove packaging a Remove tape. 3 b Lower the access door to check inside for shipping material and components. Locate components Windows CD print cartridges Macintosh CD power adapter and cord control-panel overlay (may be attached) USB cable* User (Reference) Guide * The contents of your box may differ.
4 Attach the control-panel overlay (if not attached) a Remove the adhesive backing from the control-panel overlay. b Raise the lid. Place the control-panel overlay into the recess. Make sure it sticks in place. The HP PSC will not work until you attach the control-panel overlay! 5 Load plain white paper Forcing paper too far into the tray might cause a paper jam.
7 Turn on the device Check for a light next to the On/ Resume button. Wait for it to finish initializing. 8 Open access door Lower the access door. 9 Prepare print cartridges Remove the bright pink tape from both print cartridges. Do not touch the copper-colored contacts or retape the cartridges.
10 Insert the black print cartridge a Hold the black print cartridge up with the HP label on top. b Slide the black print cartridge at a slight angle into the right side of the print carriage. c Press firmly until the print cartridge snaps into place. 11 Insert the tri-color print cartridge a Hold the tri-color print cartridge up with the HP label on top. b Slide the tri-color print cartridge at a slight angle into the left side of the print carriage.
12 Align the print cartridges Scan button a Wait for the print cartridge alignment page to print. b Place the top of alignment page face down in the front corner of the glass. Close the lid. c Press the Scan button. After the On light stops blinking, alignment is complete. Discard or recycle the alignment page. If you are not connecting the device to a computer, continue to the User Guide for information on how to get started.
14 Insert the correct CD Windows Users: a Insert the HP PSC Windows CD. b Follow the onscreen instructions. Macintosh Users: Insert the HP PSC Macintosh CD. Go to Step 15 before installing. If the startup screen does not appear, double-click My Computer, doubleclick the CD-ROM icon, and then double-click setup.exe. 15 Connect the USB cable Windows Users: Macintosh Users: When you see this screen, connect the USB cable. a Connect the USB cable. b Double-click the HP All-in-One installer icon.
16 Continue software installation Windows Users: Macintosh Users: If you do not see this screen, see Troubleshooting on the last page. Make sure you complete all screens, including the setup assistant. Follow the onscreen instructions. Complete the registration screen. 17 Congratulations! When you see the Congratulations! screen, you are ready to use your HP PSC. See the User Guide or onscreen help to get started.
Troubleshooting *Q5763-90209* *Q5763-90209* Q5763-90209 Problem: The Check Print Cartridge message lights up after you insert the print cartridges. Action: Remove the print cartridges. Make sure you remove all tape from the copper contacts. Close the access door. Refer to Step 9. Problem: Paper jammed during print cartridge alignment. Action: Turn off the device and remove the back door. Gently remove any paper. Turn the device on and carefully insert the paper. Refer to Step 5.
