User guide

5 Setting up, backing up, restoring, and
recovering Windows 8
This chapter provides setup and update information for the Windows 8 operating system. It includes
these topics:
●
Supplementary information
●
Setting up the Windows 8 operating system
●
Downloading Windows 8 updates
●
Backing up, restoring, and recovering Windows 8
CAUTION: Do not add optional hardware or third-party devices to the HP workstation until the
operating system is successfully installed. Adding hardware might cause errors and prevent the
operating system from installing correctly.
NOTE: After you set up the operating system, be sure that the latest BIOS, drivers, and software
updates are installed on the workstation. See
Updating the workstation on page 38.
Supplementary information
Additional information is available in Help and Support after you customize the operating system.
Setting up the Windows 8 operating system
The first time you turn on the workstation you can customize the operating system. When you are
connected to the Internet, Microsoft activates your operating system. This process takes about 15 to
30 minutes. Carefully read and follow the instructions on the screen.
We recommend that you register your workstation with HP, so you can receive important software
updates, request support, and sign up for special offers.
CAUTION: After the initial setup process has begun, DO NOT TURN OFF THE workstation UNTIL
THE PROCESS IS COMPLETE. Turning off the workstation during this process may damage the
software that runs the workstation or prevent its proper installation.
NOTE: Windows includes the User Account Control feature to improve the security of your
workstation. You may be prompted by User Account Control for your permission or password when
you perform certain tasks. To continue a task, select the appropriate option. For information about
User Account Control, see Help and Support: from the Start screen type help and then select Help
and Support.
Supplementary information 25