User guide

●
Never restrict the incoming or outgoing airflow of the workstation by blocking any vents or air
intakes, as shown in the following figure.
Setup procedures
WARNING! To reduce the risk of electric shock or damage to your equipment, observe these
practices:
• Plug the power cord into an AC outlet that is easily accessible.
• Disconnect power from the workstation by unplugging the power cord from the AC outlet (not by
unplugging the power cord from the workstation).
• Plug the cord into a grounded (earthed) three-pin outlet. Do not disable the power cord grounding
pin (for example, by attaching a two-pin adapter). The grounding pin is an important safety feature.
NOTE: An HP Z840 Workstation with a 1125 W power supply might require more power than the
typical office environment can supply. For details, see the
Site Preparation Guide for the workstation
at
http://www.hp.com/support/workstation_manuals.
To set up the workstation:
1. Connect the mouse, keyboard, and power cord to the workstation.
2. Connect the monitor to the workstation.
3. Connect other peripheral components (such as a printer) according to the instructions included
with the device.
4. Connect a network cable to the workstation and to a network router or LAN device.
5. Plug the workstation power cord and monitor power cord into an AC outlet.
Setup procedures 13