Manualshelf

Specifications

ManualsBrandsHP ManualsAll-in-One workstationsProOne 400 G1 19.5-inch Non-Touch All-in-One Base Model PC
81828384858687888990
9. Disconnect the optical drive data (3) and power (4) cables from the system board.
NOTE: Be careful not to damage the cable when disconnecting it from the board. Do not pull on
the wires.
10. Remove the connector from the computer.
To install the optical drive connector, reverse the removal procedures.
76 Chapter 5 Removal and Replacement Procedures All-in One (AIO) Chassis