Specifications

8. Disconnect the display cable from the back of the display by pressing in on the latches on the
sides of the cable (1), and then pulling the cable away from the connector (2).
To install a display panel, reverse the removal procedures.
Be sure to correctly position the jumpers on the converter board for the installed display panel.
CAUTION: Incorrect jumper placement can result in damage to the converter board and display
panel.
●
LG panel: pins (1)(2) and (3)(4)
●
AUO panel: pins (2)(3) and (5)(6)
To install a display panel, reverse the removal procedures.
74 Chapter 5 Removal and Replacement Procedures All-in One (AIO) Chassis