Specifications

System board
Description Spare part number
System board for use in models without the Windows 8 operating system 737339-001
System board for use in models with Windows 8 Standard 737339-501
System board for use in models with Windows 8 Professional 737339-601
System board for use in models with NetClone 757991-501
The system board is located on the right side of the computer (viewed from the rear). It is secured with
eight Torx screws.
To remove the system board:
1. Prepare the computer for disassembly (see
Preparing to disassemble the computer on page 27).
2. Remove the rear cover (see
Rear cover on page 29).
3. Remove the VESA mount bracket (see
VESA mount bracket on page 32).
4. Remove the system board shield (see
System board shield on page 52).
5. Remove the heat sink (see
Heat sink on page 63).
6. Remove the memory modules (see
Memory on page 53).
7. Remove the processor (see
Processor on page 65).
8. Remove the WLAN module (see
WLAN module on page 67).
9. Disconnect all cables from the system board, noting their location for reinstallation.
System board
69