Manualshelf

Specifications

ManualsBrandsHP ManualsAll-in-One workstationsProOne 400 G1 19.5-inch Non-Touch All-in-One Base Model PC
71727374757677787980
Heat sink
Description Spare part number
Heat sink 754085-001
The heat sink is located near the middle of the computer and is secured with four captive Torx screws
and one non-captive Torx screw. You do not have to remove the fan to remove the heat sink.
To remove the heat sink:
1. Prepare the computer for disassembly (see
Preparing to disassemble the computer on page 27).
2. Remove the rear cover (see
Rear cover on page 29).
3. Remove the VESA mount bracket (see
VESA mount bracket on page 32).
4. Remove the system board shield (see
System board shield on page 52).
5. Remove the non-captive Torx screw from the end of the heat sink (1).
Heat sink
63