Specifications

Fan

Description Spare part number

Fan 754086-001

The fan is located near the middle of the computer and is secured with three Torx screws. You do not

have to remove the heat sink to remove the fan.

To remove the fan assembly:

1. Prepare the computer for disassembly (see

Preparing to disassemble the computer on page 27).

2. Remove the rear cover (see

Rear cover on page 29).

3. Remove the VESA mount bracket (see

VESA mount bracket on page 32).

4. Remove the system board shield (see

System board shield on page 52).

5. Disconnect the fan cable from the system board connector labeled CHFAN (1).

6. Remove the three Torx screws that secure the fan to the computer (2).

Fan