Manualshelf

Specifications

ManualsBrandsHP ManualsAll-in-One workstationsProOne 400 G1 19.5-inch Non-Touch All-in-One Base Model PC
61626364656667686970
System board shield
The system board shield is located on the right side of the computer (when viewed from behind).
To remove the system board shield:
1. Prepare the computer for disassembly (see
Preparing to disassemble the computer on page 27).
2. Remove the rear cover (see
Rear cover on page 29).
3. Remove the VESA mount bracket (see
VESA mount bracket on page 32).
4. Remove the three screws that secure the shield to the chassis, and then rotate the shield out of the
chassis.
To replace the system board shield, reverse the removal procedures.
52 Chapter 5 Removal and Replacement Procedures All-in One (AIO) Chassis