Specifications

4. Remove the two black Torx screws (2) that secure the board to the computer.
5. Remove the converter board from the computer.
Be sure to correctly position the jumpers on the converter board for the installed display panel.
Jumper settings are stamped into the metal in the chassis near the converter board, as well as
provided below:
CAUTION: Incorrect jumper placement can result in damage to the converter board and display
panel.
●
LG panel: pins (1)(2) and (3)(4)
●
AUO panel: pins (2)(3) and (5)(6)
To install the converter board, reverse the removal procedures.
Converter board
51