Specifications

Converter board
Description Spare part number
Converter board 754089-001
The converter board is located on the left side of the computer. It is secured with two Torx screws and
has two connectors.
Use the same converter spare part for all display panels; however, you must change jumper settings on
the board based on the display panel.
To remove the converter board:
1. Prepare the computer for disassembly (see
Preparing to disassemble the computer on page 27).
2. Remove the rear cover (see
Rear cover on page 29).
3. Disconnect the two cables from the board (1).
NOTE: Be careful not to damage the cables when disconnecting them from the board. Do not
pull on the wires.
50 Chapter 5 Removal and Replacement Procedures All-in One (AIO) Chassis