Specifications

Front bezel

Description Spare part number

Front bezel 754736-001

Webcam cover, for use in models without a webcam 754074-001

The front bezel is located on the front of the computer and is secured to the main system bracket with

14 Torx screws. You can separate the bezel from the computer with most of the computer assembled.

You have to remove the rear cover and the webcam to remove the front bezel from the computer.

To remove the front bezel:

1. Prepare the computer for disassembly (see

Preparing to disassemble the computer on page 27).

2. Remove the rear cover (see

Rear cover on page 29).

3. Remove the webcam (see

Webcam module on page 43).

4. Remove the 14 Torx screws that secure the bezel to the main system bracket assembly.

5. Lift the computer from the bezel.

NOTE: Components may stick together when separating the bezel from the computer.

To install the front bezel, reverse the removal procedures.

Front bezel