Specifications

VESA mount bracket
The computer stand is secured to a VESA mount inside the computer chassis. You must remove the
VESA mount to access the hard drive and system board.
To remove the VESA mount bracket:
1. Prepare the computer for disassembly (see
Preparing to disassemble the computer on page 27).
2. Remove the rear cover (see
Rear cover on page 29).
3. Remove the three Torx screws (1) that secure the bracket to the computer, and then remove the
bracket (2).
Reverse these procedures to install the VESA mount bracket.
Replacing drives
Description Spare part number
Optical drives:
Blu-ray writer (BD-RE) drive 719157-001
SuperMulti DVD±RW drive 657958-001
DVD-ROM drive 608394-001
Optical drive bezel (for use in models without an optical drive) 754073-001
Hard drives/solid-state drives:
2 TB, 7200 rpm hard drive 616608-001
1 TB, 7200 rpm hard drive 621418-001
1 TB, 7200 rpm, hard drive, 2.5-inch, SSHD 724937-001
32 Chapter 5 Removal and Replacement Procedures All-in One (AIO) Chassis