Manualshelf

Instruction Manual

ManualsBrandsHP ManualsComputer HardwareProLiant WS460c Gen8 Graphics Server Blade
11121314151617181920
Operations 20
5.
Close the SAS controller handle and then install the SAS controller. To properly seat the SAS controller,
press firmly in the areas indicated on the SAS controller.
Remove the WS460c Graphics Expansion Blade
access panel
1. Power down the workstation blade (on page 14).
2. Remove the workstation blade (on page 15).
3. Lift the access panel latch (1), and then slide the access panel to the rear (2).
4. Remove the access panel.